Photoshop Tips Collection 80 (Part 2)

41. Hold down the Ctrl key and click on the layer's icon (on the panel) to load its transparent channel. Then hold down the Ctrl+Alt+Shift keys to click on another area where the two layers of transparent channels intersect. The original constituency can be retained.

43. Use the Shift and Alt keys in the Select Box tool:

When you select a picture using the "Select box", you want to expand the selection area, hold down the Shift key, the cursor "+" will become "Ten +", drag the cursor, so that you can expand your site based on the original selection Required selection area. Or select two or more marquees simultaneously in the same subpicture. When you select a picture with the "Select box", you want to subtract the extra picture from the "Select box", hold down the "Alt" button, the cursor "+" will become "Ten-", drag the cursor, then You can leave the picture you need. When using the “select box” to select the image, you want to get the two marquee superimposed parts. Then hold down the “Shift+Alt” key, the cursor “+” will change to “10”, drag the cursor so that you want section. To get a perfect circle or square in the Marquee, hold down the Shift key.

44. Using the Shift and Alt keys in the Lasso tool:

Increase the selection by pressing the "Shift" key. (The method is the same as 1 in "Select box")
Reduce the selection range Press the "Alt" key. (The method is the same as 2 in "Select box")
Press the "Shift+Alt" key in the area where the two marquees overlap. (The method is the same as 3 in "Select box")

45. Use the Shift and Alt keys in the Magic Wand tool:

Increase the selection by pressing the "Shift" key. (The method is the same as 1 in "Select box")
Reduce the selection range and press the "Alt" key. (The method is the same as 2 in "Select box")
Press the "Shift+Alt" key in the area where the two marquees overlap. (The method is the same as 3 in "Select box")

Keyboard shortcuts

46. ​​You can use the following shortcut keys to quickly browse your image:

Home Scrolls to the top left corner of the image; End scrolls to the bottom right corner of the image; Page UP scrolls above the image; Page Down scrolls to the bottom of the image; Ctrl+Page Up scrolls to the left of the image; Ctrl+Page Down scrolls To the right of the image.

47. Press Ctrl+Alt+0 to display the image 1:1.

48. When you want to "tighten" (adjust the space between individual letters), first click between the two letters, then press the Alt key and use the left and right arrow keys to adjust.

49. Restore the settings in the dialog box to the default. Hold the Alt key first, then the Cancel key will become the Reset key, and then click the Reset key.

50. To quickly change the value displayed in the dialog box, first click on that number with the mouse and place the cursor in the dialog box. Then you can use the up and down arrow keys to change the number. If you press the Shift key before changing the value with the arrow keys, the value changes faster.

51. In addition to the familiar keyboard shortcuts Ctrl+Z (which allows you to freely switch between history and current state), Photoshop 6.0 also adds Shift+Ctrl+Z (used to continuously recover from * in order) and Alt+Ctrl+Z (makes the user You can follow the * order to gradually cancel the *) two shortcuts. Press Ctrl+Alt+Z and Ctrl+Shift+Z to go backwards and forwards respectively in the history (or use the menus in the History panel to use these commands).

52. Fill function:

Shift+Backspace opens the fill dialog;

The Alt+Backspace and Ctrl+Backspace key combinations fill the foreground and background colors respectively.

Press Alt+Shift+Backspace and Ctrl+Shift+Backspace to fill only the existing pixels (keeping the transparent area) filled with foreground and background colors.

53. The D and X keys on the keyboard quickly switch the foreground and background colors.

54. Use any drawing tool to draw a straight stroke: click the mouse at the starting point, hold down the Shift key, and then move the cursor to the ending point to click.

55. When you open the Curve dialog box, press the Alt key and click the curve box to make the grid lines finer. Then click the mouse to restore the original shape.

56. After selecting a range using the Rectangle (ellipse) selection tool, press and hold the mouse, and then press the space bar to adjust the position of the marquee as desired. After the release, you can adjust the size of the selection.

57. Add a rectangle or ellipse drawn outward from the center. In any of the additional selection areas, first press the Shift key to drag the mask tool for the rectangle or ellipse, then release the Shift key, then press the Alt key, and finally the pine Open the mouse button and release the Alt key. Press Enter or Return to close the slider box. To cancel the change, press the Escape key (Esc). To increase or decrease the value in 10% increments when you open the Pop-up Slider dialog box, hold down the Shift key and press the Up Arrow or Down Arrow key.

58. To preview the CMYK mode colors of the RGB mode image on the screen, execute the “View” → “New View” command, generate a new view, and then execute the “View” → “Preview” → “CMYK” command , you can view the two modes of the image at the same time for comparison and analysis.

59. Press the Shift key to drag the marquee tool to limit the marquee to square or round; press the Alt key to drag the marquee tool to draw the marquee from the center; press Shift+Alt key to drag the marquee tool to draw a square or circle from the center Shaped box.

60. To prevent the selection box from sticking to the picture border when using the cutting tool, hold down the Ctrl key while dragging the control point on the selection box of the clipping tool.

61. To correct a tilted image, first use the measurement tool to draw a line (such as the border of the image, the frame, the horizontal lines between the eyes, etc.) on the map that can be used as a horizontal or vertical reference, and then select “Image” from the menu. "→" Rotate Canvas" → "Any Angle..." After opening, you will find that the correct rotation angle has been filled in automatically. Just press OK to OK.

62. You can use the cutting tool to complete the rotation and cutting work in one step: first draw a box with the cutting tool, drag the control point on the selection box to adjust the angle and size of the selection box, and finally press Enter to rotate And cut. The angle measured by the measuring tool is also automatically filled in the number conversion tool (Edit → Transform → Number) dialog box.

63. After the image is cropped, all the pixels outside the clipping range are lost. To cut without loss you can use the "canvas size" command instead. Although Photoshop will warn you that you will perform some cuts, for some reason, in fact, not all "cut out" data is kept outside the picture, but this has no effect on the index color mode.

64. Press Ctrl+Alt+Shift+E when merging visible layers to copy all visible layers and merge them into the current layer. It is also possible to hold the Alt key while merging layers, copy the current layer and merge it into the previous layer, but the Ctrl+Alt+E hotkey does not work.

65. Press Shift+Backspace to activate the Edit→Fill command dialog. Press Alt+Backspace to fill the foreground with a marquee; press Ctrl+Backspace to fill the background with eight marquee boxes.

66. Press Shift+Alt+Backspace key to fill the foreground color box and keep the transparent setting. Press Shift+CtrBackspace key to fill the selection box with the background color and keep the transparent setting.

67. Press Alt+Ctrl+Backspace to fill the selection or layer from the history. Press Shift+Alt+Ctrl+Backspace to fill the selection or layer from the history and keep the transparency setting.

68. Press Ctrl+“=”key to enlarge the image display, but the window does not shrink. Press Ctrl+“-”key to keep the image displayed continuously, but the window will not shrink. Press Ctrl+Alt+“=” key to display the image. Zoom in continuously, and the window is enlarged. Press Ctrl+Alt+“-” to keep the image displayed continuously and the window is reduced.

69. When moving layers and selections, hold the Shift key to move horizontally, vertically, or at a 45-degree angle; press the arrow keys on the keyboard to make a 1-pixel move each time; hold down the Shift key and press the key on the keyboard The arrow keys can do 10 pixel movements at a time.

70. When creating a guide, Shift-drag the guide to fit it to the scale; press Alt to drag the guide to change the guide to horizontal or vertical orientation.

71. In the "Image" → "Adjustment" → "Curve" command dialog box, hold down the Alt key inside the grid line to make the grid line fine or rough; hold down the Shift key and click the control point to select more Control points, hold down the Ctrl key and click on a control point to delete the point.

72. To copy an image on a layer to the center of another image window with a different size, hold down the Shift key while dragging to the destination window, and the image will be automatically centered after being dragged to the destination window.

73. When using the "Edit" → "Free Transform" (Ctrl + T) command, hold down the Ctrl key and drag a control point to free deformation adjustment; hold down the Alt key and drag