Now many families have installed solid wood flooring. After using the flooring for a long time, it will inevitably appear discolored, fluffed, deformed, etc., which greatly affects the appearance of the home. Is it necessary to completely remove the floor and lay a new floor? actually not. Wood floor renovation can also get the effect you want. So what floor is eligible for renovation? How to operate the wooden floor renovation? Don't worry, the following editor will introduce you to the relevant knowledge of the steps of polishing and refurbishing solid wood floors . Let's take a look.
Polished solid wood flooring- what kind of flooring meets the requirements for renovation
â— Pure solid wood flooring can be completely renovated, and the renovation of solid wood flooring depends on the thickness of the floor surface, because the refurbished floor needs to polish off the thickness of the floor surface of 1-2 mm, the thickness of the surface layer is less than 2 mm Multi-layer composite floor is not suitable for renovation, and will affect the service life of the floor.
â— The renovation of the three-layer composite floor with a surface layer of more than 4 mm will not affect the middle layer and meet the renovation conditions.
â— In addition, the parquet refurbishment should also consider the surface parquet effect and other issues.
Discussion: Floor renovation vs replacement of new floor
Floor renovation refers to the restoration of the old floor as new by sanding the surface of the floor, scraping putty, painting, waxing and polishing. Compared with the replacement of new floors, the cost of floor refurbishment is low, and after using the old floor for a long time, the wood property becomes stable, and the environmental protection is much better than the new floor.
Editor's suggestion: Regarding the replacement of the wooden floor and the renovation of the wooden floor, it also depends on the material of the wooden floor and the degree of damage to the floor. If the material is good, the renovation can be renewed, which can also save costs. In the case of general materials or severe damage, there is no need to renovate, just replace it directly.
Polishing and refurbishing of solid wood floors- refurbishment steps
Floor refurbishment requires professional sanding machines, and also involves painting and other processes, so it is generally handed over to a special refurbishment company. However, the owner still needs to first understand the basic steps of the renovation to prevent being pitted.
1. Preliminary preparation
â— Before polishing, clean the dirt on the wooden floor.
â— Find out what are the problems with solid wood floors, such as local cracks, severe scratches, small arches, etc., and keep the impurities on the floor clean and tidy.
2. Construction steps
Step 1: Polish the floor
The first step of floor refurbishment is to use large-scale floor refurbishment machinery to polish and remove the paint layer and surface layer 1-2 mm. Note that the sandpaper with different thicknesses of 40 mesh, 80 mesh and 120 mesh is sanded three times in succession. The larger the mesh number, the smaller the sandpaper particles and the less obvious scratches left by sanding, ensuring smooth and smooth surface after sanding.
Step 2: Scrape putty
After the floor is polished, it is necessary to scrape the putty to level the floor. Use the special transparent primer putty matching with the floor paint and scrape on the polished floor to dry.
The third step: brush primer and color adjustment
After scratching the putty, the floor is primed or toned. Because the texture of the solid wood surface layer is natural, the color can not be changed, only the depth of the floor color can be adjusted.
Step 4: Brush the top coat
After the primer has dried, brush the topcoat. After drying again, carefully grind with water sandpaper to grind the floor surface to a rough texture. Remove the dust and brush the second coat.
The fifth step: waxing and curing
After the topcoat is dry, use professional waxing equipment to polish the floor with wax.
Polishing and refurbishing of solid wood floors-matters needing attention
1. It should be noted that not all floors can be renovated , only solid wood floors, solid wood composite floors and bamboo floors with a thickness of 4 mm or more can be renovated. Because the initial polishing will wear off 1-2 mm, too thin floors are easy to polish out the middle layer, which affects the life of the floor, so it is best to go to the dealer to know the thickness of the surface layer of your floor before renovation.
2. If the color of the solid wood composite parquet block is not the saturated color but the surface coloring, or the color of the veneer layer is relatively thin, the parquet effect will be destroyed after polishing, it is recommended not to renovate.
3. If it is a reinforced floor, it cannot be renovated, because there is a layer of aluminum oxide wear-resistant layer on the surface, renovation will destroy its wear-resistant layer and will aggravate the aging of the floor.
4. If the floor has been damaged, mildewed or deformed, it is generally difficult to renovate and remedy if the situation is more serious.
5. In order to ensure the quality of the floor renovation, it is better to ask a more professional renovation company or cleaning company to be responsible for this project. If conditions permit, professional supervision personnel can also be used to supervise the construction.
Tips: Maintenance method of solid wood floor
1. When maintaining solid wood floors, be sure to keep the floors dry and clean to avoid contact with large amounts of water. It is not allowed to scrub with corrosive liquids such as alkaline water, soapy water, etc., so as not to damage the paint film; it can be wiped with a wringed pure cotton mop, such as rubbing with steel wool in case of stains, wet mop, gasoline, flammable items and high temperature Wipe the liquid.
2. Wax it every once in a while, and the time interval depends on the finish of the floor paint. It is recommended to wax at least twice a year for maintenance. The method is to use a semi-dry rag to clean the floor and wax it. The floor wax should be evenly applied to the surface of the floor and "saturated". After a little dry, use a dry soft cloth to wipe the floor back and forth until it is smooth and transparent .
3. If you accidentally pour water or leave water on the ground, you must clean it with a dry soft cloth in time. After wiping it clean, you should not directly expose it to the sun or bake it with an electric stove to avoid drying too fast and cracking the floor. The urine of animals has acidity and alkalinity and should be cleaned up when used.
Editor's summary: The polishing and refurbishing of solid wood flooring has great advantages no matter from which side it is considered. The cost of refurbishing solid wood flooring is low, and you can harvest brand new solid wood flooring with the least amount of money. Why not do it? If you still want to learn more about the polishing of solid wood flooring , then follow our website information channel!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Top ten brands of solid wood flooring
Herb Grinder,Dry Herb Grinder,Herb Grinder Kit,Electric Herb Grinder
Dongguan Chakou Silicone Products Co, Ltd , https://www.waxmaidwholesale.com