The salt spray test chamber is a crucial piece of equipment used for artificial three-proof testing—covering humidity, salt spray, and mold resistance. During the testing process, unexpected situations can occur, such as an abrupt interruption in the test. When this happens, it's important to know how to respond properly. In this article, we’ll walk you through the best practices for handling such scenarios and provide guidance on how to proceed effectively.
Unexpected interruptions during a salt spray test typically fall into two main categories. According to the special requirements outlined in section 3.12 of GJB150.11A-2009:
1. Test Interruption Due to Condition Drop: If the test is interrupted and the environmental conditions fall below the required levels, exceeding the allowable tolerance, a full visual inspection of the test specimen should be conducted. A technical assessment must also be performed to evaluate the impact of the interruption on the test results. Once the test conditions are restored and stabilized, the test should resume from the point where it was interrupted.
2. Test Interruption Due to Condition Rise: If the test is interrupted due to conditions exceeding the specified values, the test environment must be re-stabilized within the acceptable range. The test should then be maintained at that level until a thorough visual inspection and technical evaluation can be completed. If the evaluation concludes that the interruption had no significant effect on the final results or the impact was negligible, the test may resume from the point where the tolerance was exceeded. However, if the interruption is found to have affected the results, a new test sample must be used to restart the entire test.
Handling unexpected interruptions requires careful documentation, proper assessment, and strict adherence to established procedures. By following these guidelines, you can ensure the integrity and reliability of your salt spray testing process. Whether you're conducting military-grade tests or industrial evaluations, understanding how to manage such situations is essential for accurate and consistent outcomes.
Plastic Dish Rack,Plastic Dish Drainer,Dish Drainer,Dish Strainer
Jiangmen Jianghai Jianshang Houseware Co.,LTD. , https://www.jm-jianshang.com