Box type rain test box should avoid which operation misunderstanding

I believe that novices often make some low-level mistakes when operating the box-type rain test chamber. What needs special explanation is that they are not aware of their mistakes. This is a serious problem. Today, Xiaobian gives you some precautions for operating the box-type rain test box, hoping to help the novice. In the case mentioned in this article, I hope that you have changed it, but you will not be crowned.

1. The power supply of the test box is single-phase three-wire system (that is, one fire and one fire). To ensure the safety of the test box and personal safety, please supply power according to the requirements of our company and reliably ground;

2. It is strictly forbidden to place the sample to be tested that is prohibited by our company in the working area of ​​the equipment. Please carefully read the instructions for use on the instruction manual;

3. If a hot sample is placed in the box, use an external power supply for the sample. Do not use the power supply of the device directly.

4. Do not open/close the product door by gravity. Otherwise, the door may fall off, resulting in product damage and injury.

5. When the product is stopped for a long time, it should be periodically removed to avoid moisture damage;

6. Non-professionals shall not disassemble or repair.

For more information on the box rain test chamber, please continue to pay attention to this site!

箱式淋雨试验箱应规避哪些操作误区

Dining Chair

Dining Chair Set,Dining Table Chairs,Outdoor Dining Chairs,Wooden Dining Chairs

Ningbo Autrends International Trade Co., Ltd. , https://www.homefavorities.com