MEICO of Italy introduced FC 780 E and FC 600 E new thermoforming machines. The machine is manufactured by its Swiss sister company WM Wrapping Machine. This molding/cutting/stacking/(vacuum and pressure) thermoforming machine is all driven by a motor (servo motor).
The FC 780 E and FC 600 E models have molding areas of 780 x 570 mm and 640 x 450 mm, respectively, which are suitable for small to medium batch production. At the same time, they also meet the requirements for flexibility and rapid die change.
The clamping force and cutting force of the FC 780 E model are 20 tons and 60 tons, respectively; and the clamping force and cutting force of the FC 600 E model are 15 tons and 50 tons, respectively.
Both models (including standard models) contain a variety of features that can process all types of rolled thermoformed sheets up to 2 mm in thickness, including HIPS, GPPS, PET, PVC, PP, OPS, and EPS.
Each of the two independent heating boxes on the upper and lower sides is equipped with a proportional heating zone. Both the molding section and the cutting section are equipped with upper and lower independent dynamic pressure plates. The stacking device can also be equipped with devices for counting, ejecting and curling of edge materials.
The advantages of the FC 780 E and FC 600 E models also include: high mechanical cycle speed, speeds of up to 40 beats per minute when using AA PET trays with 350 micron sheets, low noise, low energy consumption, and quick setting because Special mechanical design and special procedures for single board machines are used to facilitate mold replacement.
The polypropylene composite cap for plastic infusion container comprises of the pullâ€tab outer cap, inner cap, and synthetic medicalâ€level polyisoprene cushion; among which, the materials for the inner cap and outer cap are the imported medicalâ€level polypropylene, complying with the FDA rules and passing the USP CLASS VI test; the synthetic medicalâ€level polyisoprene cushion can be made from the imported product on the request of user. The inner cap of the composite cap will contact with liquid medicine directly to ensure the quality; whereas the cushion will be helpful to prevent penetration and seal whilst infusing the liquid medicine, and the outer cap plays a role to prevent bacterium.
The composite cap is produced in the clean plant, with the overall plant reaching to Class 10,000 and some for Class 1,000,000. The main working procedures, such as the injection molding, inspection, cleaning, assembly and inner packing and so on, are designed and processed as per the
cleanliness requirements at the partial level of Class 100, which passes the GMP onâ€site certification and complies with the cleanliness
requirements of high capacity injection medicine.
The facilities involved by production, test and inspection of composite cap are available, with strict control and management to be conducted in the whole process of production, free of plasticizing agent, loading agent and lubricating agent, and free of absorption or transfer when contacting with liquid medicine, neither the pyrogen and soluble matter, thence such facilities may ensure the product quality.
The polypropylene composite cap for plastic infusion container is mainly used for nonâ€PVC softâ€bag infusion and polypropylene plastic bottle infusion.
PP Composite Cap For Plastic Infusion Container
Pp Cap,Plastic Cap For Infusion Container,Pp Cap For Plastic Infusion Container,Caps For Infusion Containers
YANGZHONG HONGYUN BOTTLE CAPS MAKING FACTORY , http://www.hongyunyz.com