Technical requirements for thermal transfer processing

1. The plate-making electric engraving plate of the printed flower film is mainly used for the graphics with rich transitional colors and rich sense of layers. Due to the large volume, demanding plastic products, cultural and educational supplies, daily chemical packaging, etc. The hot stamping temperature of the thermal transfer flower film is between 120 ° C and 240 ° C. It can be applied to ABS, AS, PS, PVC, PMMA, PP, PE and other plastic products, metal, wood and other coating surfaces.

2. The hot stamping temperature of the thermal transfer flower film is between 120 ° C and 240 ° C. It can be applied to ABS, AS, PS, PVC, PMMA, PP, PE and other plastic products, metal, wood and other coating surfaces.

3. Matters needing attention in hot stamping process of thermal transfer film:

Hot stamping is a special printing process. Its working principle is very simple. The image on the flower film is transferred to the product by heating and pressing. However, in the specific production practice, we must improve the quality of the product and improve production For efficiency, the following points should also be noted:

â’ˆ Keep clean:
â‘  Keep the machine's workbench, guide rollers, buttons and other components clean and free of dirt and other dirt;
â‘¡Keep the flower film clean and not contaminated with oil, fingerprints, dust, etc .;
â‘¢Keep the plastic head clean, and no dirt or scorch sticks on it;
â‘£ The operator's hands must be kept clean, no sweat, oil stains on the flower film or hot products;
⑤ Keep the objects to be cleaned clean and free from dust, oil, etc .;

â’‰ Hot stamping temperature: The hot stamping temperature varies according to the hot stamping equipment, hot stamping film, and hot stamping. It is not allowed to blindly pursue a higher or higher hot stamping temperature (lower is better). To determine the stamping temperature.

â’Š Hot stamping pressure: The hot stamping pressure must be adjusted to the most appropriate, otherwise too large will easily damage the rubber head and the object to be hot, too small and affect the hot stamping effect. After adjusting to the best hot stamping pressure, the pressure should be adjusted and locked to avoid changes in mass production.

â’‹ Hot stamping time (speed): The hot stamping time (speed) should be determined according to the specific hot stamping. The faster the speed when the hot stamping effect is guaranteed, the higher the production efficiency, but some products are limited by certain special conditions. Slow stamping must be used.

Silicone Mask Bowl:

Silicone Mask Bowl

Silicone Mask Bowl,Face Mask Bowl,Mask Mixing Bowl,Face Mask Bowl Set

Shenzhen Feiaoda Technology Co.,Ltd , https://www.flysilicone.com