Handle bag inspection and adjustment standards

Handle bag inspection and adjustment standards

1. Before Eraser to distinguish the material to be produced by appropriate choice of the glue, the plastic material of the rabbet on the width to be uniform, the thickness of the glue should be uniform, glue on the edge points may not exceed the standard bit 1 bit.

3 fold edge of the mouth to be uniform, the same thickness , edge position straight, no uneven, can not have large and small edges, folded edges should be straight, rounded corners to be rounded. Routine folding side mouth: 2 points for the silver bag folded edge mouth, 2 points and a half for the handbag folding edge mouth; according to the material thickness and product style requirements vary, according to the actual situation shall prevail.

4. The paste must be firm and cannot be opened, foamed, or have rubber particles.

5. To pay attention to the bottom surface of the cloth are correct, there's LOGO printed cloth, fabric LOGO proper direction.

7. Opposing position, smooth handling of corners, no overlapping, bursting, wrinkling, etc.

8. Shoulder straps and wrists should be symmetric, the force parts should be supplemented with strong, oil side of the shoulder strap plus rubber tube protection.

9. The opening angle of the chain window is folded into a right angle, and the color of the chain cloth is matched with the materials. The chain of the vehicle is good and smooth, and there is no phenomenon of tooth removal, tooth decay, and hairiness. The width of the dough chain window is 1.2cm, and the width of the inner chain window is 1.0cm. The two ends of the plastic teeth zipper are flattened , and the bronze teeth are removed from the copper zipper head and tail. Chain window surface leather , lining need to fall 2 points and a half wide kraft paper folding edge , can not have the phenomenon of explosion angle , zipper requires smooth , can not play the wave , the chain Brass tight straight , sticky flat on both sides of the width .

10. Bagging smooth, symmetrical before and after, cover head bending position, valley position is moderate, can not wrinkle, the same level from left to right, can not be skewed, the inner bag is not reversed, the bag mouth is smooth without wrinkling, deformation, inner bag size is moderate, plus When supporting the steel sheet, it must be flat and in an accurate position. It can hold out the bag type and do not scratch the leather surface.

Haida Instrument Co., Ltd. is a professional manufacturer of luggage testing equipment. It specializes in sales of shock vibration testing machines for bags, zipper testing machines , luggage puller testing machines, and drum drop testing machines . The company is committed to providing companies with solutions for the entire laboratory to help companies improve product quality and solve various customer requirements of product quality problems.

    For more detailed information or requirements, please call our sales department to obtain the relevant catalog or consult relevant information. Thank you! Haida Instrument Co., Ltd. Tel: 400-071-1808/0769-89280808 , company website : http:// Welcome to the company website for more product details.

Source: Dongguan Haida International Instruments    Reproduced without permission! (Or: if you need to reprint, indicate the source)