There are many kinds of furniture, more doorways, and it is easy to be fooled if you are not careful. For ordinary consumers, although they do not have the expertise of furniture, as long as they pay attention to the following aspects, they can avoid being cheated in the process of purchasing furniture.
Is the furniture material reasonable?
Different furniture, surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while other materials can be used inside; the thickness of the large wardrobe legs is 2.5cm, which is too thick and too clumsy, and is easy to bend and deform; Cabinets for kitchens and bathrooms cannot be made of fiberboard, but plywood should be used because the fiberboard will expand and damage when exposed to water; the table should be washable.
It was found that the wood had insect eyes and foaming, indicating that the drying was not complete. After checking the surface, you should open the door and drawer door to see the inner material. You can use your nails to lick it. If you break it in, it means that the inner material is decaying.
Wood moisture content does not exceed 12%
The moisture content of furniture should not exceed 12%, the water content is high, and the wood is easy to warp and deform. When a general consumer purchases, there is no test instrument, and a hand touch method can be adopted. Touch the bottom of the furniture or the place where there is no paint on the hand. If it feels moist, the moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If the sputum is slow or not, the water content is high.
Is the furniture four feet flat?
Put it on the ground, and you will know that some furniture has only three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is put up and will be rotated; the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection door and do not sag. The drawers should not be too large and should be straight and straight.
Veneer furniture is not strictly tight
Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not. Look at the light when you check it, and don't see it when you don't.
Ash veneer veneer veneer furniture is relatively easy to damage, generally only two years. In the case of wood veneers, the veneered veneers are better than the rotary cuts, and the veneered veneer lumber has a straight and dense texture, and the veneered veneer pattern is curved and sparse. Particleboard veneer furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the veneer furniture are easy to tilt up, and the corners are rubbed by hand. If you get up at a glance, there is a problem with the glue.
Is the furniture edged flat?
The edge is not flat, indicating that the inner material is wet, and the seal will fall off in a few days. The edge banding should also be rounded and not straight at right angles. The edges sealed with wood strips tend to get wet or crack. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nail hole is sealed with putty. Pay attention to whether the putty is bulging. If it is bulged, the putty will slowly fall out from the inside.
The paint part should be smooth
The paint part of the furniture should be smooth and flat, not sloppy, wrinkle-free, and flawless. The corners are not straight at right angles, and the straight edges are prone to slag and paint. There should also be a paint inside the door of the furniture, without the paint board being easy to bend and not beautiful.
Take a mirror with furniture
Choose furniture with mirrors, such as dressing table, mirror, and dressing mirror. Take care of it and see if the mirror is deformed. Check if there is lining paper and backboard at the mercury in the back of the mirror. Qualified, no paper, no, will rub the mercury off.
Smell
When selecting, you need to open the furniture and smell whether it has a strong pungent smell. This is also the most effective way to determine whether the furniture is environmentally friendly. If the irritating odor is large, it proves that the board used in the furniture contains a lot of free formaldehyde, which will pollute the indoor air.
Sitting on a sofa or a soft bed
When picking a sofa or a soft bed, you should pay attention to the flat surface, not high and low; the soft and hard should be even, but not hard here, soft there; the hardness should be moderate, neither too hard nor too soft. The method of selection is to sit down, squat with your hand, flat, and the spring does not ring. If the spring laying is unreasonable, a springing phenomenon will occur and a sound will be heard. Secondly, it should also pay attention to whether the quilting has broken wires or jumpers, and whether the density of the corner teeth is reasonable.
Movement boosts individual productivity-imagine what it does for teamwork. It`s time to extend the benefits of an energized workstation to the meeting room, too. The KingStar's Conference Table will keep creativity flowing in all-day work sessions by allowing your team to alternate between sitting, standing and stretching out.
This modern conference table comes in two sizes that comfortably accommodate either six or eight people.
Height Adjustable Conference Table
Standing Conference Desk, Height Adjustable Conference Desks, Office Conference Tables
Ningbo YINGBOTE Trading Co.,Ltd , http://www.intelligentoffice-cn.com