Many people who have used woodworking engraving machines think that woodworking engraving machines are not as clean as cleaning. It can be said that they are basically not needed. When using them, it is enough to clean the countertops. Why? Because they all think that the working process of the woodworking engraving machine itself has a lot of dust, that is to say, he is the thing that is applied in the dust. If it is cleaned every day, it will be too much trouble, so many people not only do not clean it, but also It is wrong to let the machine be full of things.
First, the computer side
Check the virus regularly, but be careful not to open the anti-virus level when working, and be careful to interfere.
Clean the dust of the chassis regularly, pay attention to the heat dissipation of the chassis, and be careful that the industrial control card is faulty due to excessive dust.
Regularly defragment your disk to optimize your computer system.
Computer abnormalities can also cause many problems, especially for the computer connected to the engraving machine. We found that the computer abnormality also caused us a lot of unnecessary troubles during the maintenance of the woodworking engraving machine, and also delayed the customer's business. For a moment, I would like to pay attention to several aspects of customer computer maintenance.
Second, clean up
Regularly clean the industrial control box, the biggest killer of the circuit board when dust.
Regularly clean the lead screw to prevent foreign objects from sticking on the lead screw. The lead screw is very important in the equipment. It determines the accuracy of the machine and the screw also plays an important role in the transmission process.
After the work is finished, the table should be cleaned in time, which will provide convenience for the next work of the woodworking engraving machine.
Clean the material scraps along the rails and guide rails to prevent the machine from appearing during the work due to debris interference.
Third, oiling
After the oil is added, move slowly back and forth to ensure that the lubricant can be evenly applied to the guide rail and the lead screw.
If the machine is not used for a long time, it should be refueled regularly to ensure the flexibility of the transmission system.
First clean the rails and lead screws, and use a cloth (without hair removal) to clean off the oil and material scraps on the rails and lead screws. Due to the low temperature, both the guide rail and the lead screw can be oiled, and it is best to add antifreeze oil.
The refueling cycle is twice a month, that is, every two weeks.
Fourth, the temperature
When the machine is not in use, it is best to pour out the water in the water tank if the room temperature is low to prevent freezing of the water tank and the water pipe.
To ensure the ambient temperature of the operation room, the woodworking engraving machine should preferably reach room temperature, at least the staff will not be very cold.
Check the applicable temperature of the fueling standard, at least the minimum temperature.
The temperature has little effect on the woodworking engraving machine, but because the user adds butter to the screw, the winter also forgets to clean up, which leads to the opening of each boot. Some studios have low temperature. Although the oil is added, it can still be frozen. On, the machine can't run.
Five, cooling water
It is possible to use antifreeze to cool.
Pay attention to the ambient temperature. Be careful to freeze the water tank and water pipe due to the water temperature being too cold.
Cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is dirty, it will cause serious damage to the motor, ensure the cleaning of the cooling water and the normal operation of the pump.
Pay attention to the water level, and the water-cooled spindle motor must not be dehydrated, so that the motor heat cannot be exported in time.
Baby Jogger City Mini Pushchair,City Mini Pushchair,Small Travel Pushchair,Small Folding Pushchair
DongGuan Baby-Plus baby ware Co., Ltd. , https://www.baby-plus.com