[Chinese Packaging News] Corrugated cardboard is made into corrugated packaging cartons through die cutting, creasing, nail boxes or stick boxes. Corrugated packaging carton is one of the most widely used packaging products, and the amount has always been the first of a variety of packaging products. Including calcium plastic corrugated packaging cartons.
1. How to print a large area of ​​solid colors
1. How to print a large area of ​​solid colors
Household appliances have a large size and large printing format. Many of them contain large blocks on the ground, and require high color brightness. Some of them require overprinting in design. This requires that when printing, it is necessary to ensure that large areas are well-grounded and well-used. Press lightly to ensure that the quality of the overprint is good and the strength of the paperboard is not damaged; it is necessary to handle the large thick ink film in the field (generally 80μm or more) to achieve the required color brightness and saturation, but also to ensure Small text, thin lines, and screen images are clear and moist. It is indeed difficult for the four to take into account.
In order to ensure a good printing effect in a large area, the large-area field parts and small text, thin lines, and screen images can be made publicly. The hardness of the plate material selected for the large-scale field part is suitable for HS40. The hardness of the plate material selected for the small text, thin lines and screen images is suitable for HS50-HS55. Note that the thickness of the media must be consistent. The liner material replaces the blanket liner with a foam liner, and the base is based on a thin polyester film base. In this way, large-area real-time printing with small text, thin lines, and screen images are printed on the same surface at the same time, but the actual printing pressure in printing is different, and the printing pressure on large-scale field locations is less than The printing pressure of the small text, thin lines, and screen images is not only not leaking, but also the corrugated surface paper is not concave. This is generally considered to be a large area where the press must be slightly larger in order for printed ideas to be exactly the opposite.
The key point here is that the flexibility of the printing plate is fully utilized: the large piece of the ground is under slight pressure, but the kiss is full, the printed ink is very good, and there is no hard mouth; the small text, thin lines, and the part of the screen image are The plate has a high hardness, and the dots are not easily deformed.
In fact, we have all experienced such experiences: When we print a large area on the ground, if the pressure is too high, it will inevitably lead to defects or leaks.
2. How to handle overprints and overprints
Most of the large-area field printers for home appliance merchandise packaging need thicker ink film, which is difficult for small print.
When overprinting, it is required that the viscosity of the subsequent color ink be moderate, and the viscosity of the subsequent color ink should be slightly higher, and the control is preferably 50 seconds. At the same time, it is also necessary to control the drying speed of the previous color, and the water content of the cardboard must also be low.
In the drying process of the ink, the evaporation drying and the soaking and drying are performed at the same time. The printing ink layer thickness is real-time, and the evaporation and drying process is very slow. However, the penetration drying cannot be performed completely, and it will inevitably affect the subsequent color superimposition. At this time, according to the level of ink PH value, properly add stabilizer or ethanol to adjust, so that the ink drying faster, so as to prevent two-color adhesion and false false. If necessary, another printing press can be used for overprinting. At this time, the ink of the preceding color is already dry, and the overlapping printing is easier.
3. How to do a good field printing
In the field printing, the ink is thickly covered to obtain the desired color saturation and lightness, ie, to obtain the normal color and brightness. After the ink is printed on the corrugated cardboard, a part of the linking material penetrates the surface paper and is absorbed by the paper fibers. A part of the linking material collects on the surface of the surface paper to form an ink film, so the color is more vivid. In order to obtain a thick ink film, the preparation of water-based inks is preferred because large viscosity, adequate pigment ratio, and linking material molecules and auxiliary materials (such as white ink) are selected for large particle materials. Large particles of the binder molecules and auxiliary materials can prevent the ink from penetrating the inside of the paper fibers, making it easy to form an ink film on the surface of the paper sheet. In addition, it is also advisable to add other substances, such as starch, to obtain the colloidal properties of the ink.
Although home appliance merchandise packaging is inconvenient for complicated mounting and printing due to the characteristics of the merchandise, storage, transportation, and sales environment, it also needs to be colorful. Today, with the continuous development of printing technology, more advanced methods can be used to make home appliance packaging more beautiful and of higher quality.