Box Design Case Analysis (6)

19. Dissolve the top flap of pattern A in the group. Select Flip B, copy and paste twice to get two copies. Select any one of the flips B, and then simultaneously select the rectangular frame where the trademark B is located. Press the “L” key to align the edges to the edge, and then flip horizontally, as shown in Figure 19:

20, then select a flip B (two previously copied) and select the rectangle where the trademark A is located, press the "B" key to align the bottom of the rectangle, as shown in Figure 20, then hold down the Ctrl key Flip the mouse down and a box is basically completed, as shown in Figure 21:

21. Select the rectangle tool and draw a rectangle on the right side of pattern A. The size is 15 x 64mm. Select the rectangle and select pattern A. Press the “E” or “R” key to align; then press and hold the Ctrl key. Drag the mouse from left to right out of the frame of pattern A, as shown in Figure 22:

(to be continued)