[ Chinese wardrobe network ] Why choose to buy the whole wardrobe ? Environmentally friendly fashion? Save space? Or economical? Xiaobian tells you that the most important thing in the overall wardrobe is the sheet, which directly determines the quality of the wardrobe. If you don't know all kinds of plates, economic? Environmental protection? Sorry, you will be fooled!
The panels on the market are really solid wood, mainly including wood board, particle board, fiberboard, solid wood particle board, solid wood finger joint board and multi-layer solid wood board. Today, the wardrobe online Xiaobian I will unveil the true face of these 6 types of plates.
Wood board
Wood board, commonly known as large core board, is a plywood with a solid wood core. The core sheet has a high bending strength and a relatively low bending strength. Most of the market is now solid, glued, double-sided sanding, five-layer blockboard, which is one of the most commonly used plates in decoration.
These plates have good screw strength, high strength, good quality, sound absorption, heat insulation, etc. The water content is not high, between 10% and 13%, the processing is simple and the most widely used. Due to the large use of urethane glue in the production process of wood board, the formaldehyde emission is generally high and the environmental protection is not good.
Particle board
Particleboard is a piece of buds, small diameter wood, fast-growing wood, wood chips, etc., which are cut into certain specifications, dried, mixed with rubber, hardener, water repellent, etc., and pressed at a certain temperature and pressure. A wood-based panel is called a particle board because its section is similar to a honeycomb.
The surface of the particle board is flat, the texture is realistic, the weight is uniform, the pollution is resistant, the aging resistance is more beautiful, the paint and various veneers can be applied, and the sound absorption, sound insulation and heat insulation effect are good, and the moisture resistance is strong. The amount of glue used in production is small and the environmental protection is good.
Solid wood particle board
The so-called solid wood particle board is actually a kind of board produced by the process of particle board. It is a kind of particle board, also called oriented structure particle board. It is a kind of small diameter material, thinned wood, wood core, board skin, branch material and so on. A wood-based panel that has been heat-pressed after being processed into a different size of flaking by special equipment, drying, sizing and special equipment.
This type of sheet is dried by an advanced single-channel dryer. The expansion coefficient is small and the moisture resistance is very good. The flank is oriented layered, so its internal internal texture is uniform, compared with ordinary particle board and powder. The MDF has strong nail holding force, bending resistance and stability. Such boards are widely used as European and American furniture manufacturers as high-grade environmentally friendly substrates.
Fiberboard
Fibreboard, also known as MDF, is made from plant fiber as the main raw material, through hot grinding, sizing, paving, hot pressing and other processes. The fiberboard has a density, the low density board fiberboard below 450kg/m3, the medium density fiberboard of 450-880 kg/m3, and the hard fiberboard above 880 kg/m3.
This plate retains the original fiber, is pressed by high temperature, has good surface flatness, fine material and good stability. It can be easily shaped and milled. Its strength and hardness are better than particleboard, but it is not resistant to blisters. The amount of expansion is about 2mm on one side, so the MDF is more suitable for a drier environment such as a wardrobe. In addition, the amount of glue used in the production of fiberboard is large, and the environmental protection is slightly poor.
Solid wood finger joint
Finger joint board, also known as integrated board, laminated material, finger joint material, the board which is made up of deep-processed solid wood small pieces. Because the wooden board adopts a jagged interface, it is similar to the cross-docking of two fingers, so it is called the finger joint board. . Since the raw wood strips are cross-joined, such a combined structure has a certain bonding force, and since the surface plate is not required to be adhered up and down, the glue used is extremely small.
Because the joints of solid wood plates are less, the amount of glue used is also less, relatively environmentally friendly, easy to process, cut, drilled, sawed and shaped, but the solid wood finger joints are easily deformed and cracked. The quality of good solid wood finger joints is guaranteed, but the cost is high.
Multi-layer solid wood board
The multi-layer solid wood board is made of multi-layer plywood which is arranged in a crisscross pattern, and the surface is made of high-quality solid wood veneer or technical wood as a fabric, and is produced by several processes such as cold pressing, hot pressing, sanding and health. Since the multi-layer solid wood board is not easily deformed, and the indoor temperature and humidity can be automatically adjusted, the surface layer solid wood skin material has natural natural wood texture and hand feeling, so the selectivity is stronger. Therefore, it is highly favored by consumers.
The multi-layer solid wood board has good structural stability and is not easily deformed. Due to the vertical and horizontal gluing, high temperature and high pressure, the deformation defects of the solid wood board are solved from the internal stress. In the production process, the self-made high-quality environmental protection glue is used to make the formaldehyde emission limit of the product meet the national standard requirements and be environmentally friendly.
Automatic Pet Feeder,Automatic Feeder,Timed Cat Feeder,Auto Cat Feeder
Green Source(Guangzhou) Co. Ltd. , https://www.stargalaxycn.com